SAM4S MCB2300 USB Vitural Communication Port Driver Installation Guide
********************************************************************************
Get the driver

1. Download the driver in "Zip" format file (USB VCOM_driver.zip) into
   your local PC.

2. Unzip the file, saved into place that easy to remember and navigate in
   Windows file structure.

Install the driver (You will need "Administrator" authority level to perform this
installation.)

1. Connect a SAM4S ER-900 or SPS-300 register to a PC via a USB cable, then 
   power up the register.

   (On Windows 7 (and maybe Vista))

   a. You will see Windows starts to search the driver for a device, if you
      restore the window, you can see "Driver Software Installation" window is
      searching driver for "Keil MCB2300 VCOM". Click "Skip obtaining driver
      software from Windows Update" to stop it. This will take several minutes
      to terminate the procedure.

   b. To open Device Manager of Windows 7, click on Windows Logo on Taskbar ->
      Control Panel -> System. Then the "System" window will pop-up.

   c. Find and click "Device Manager" on the left hand side of System window,
      "Device Manager" window pop-up.

   d. On "Device Manager" window's category list, you should find
      "Other Devices" with "Keil MCB2300 VCOM" listed under it. right click on
      "Keil MCB2300 VCOM" then select "Update Driver Software..."

   e. On the following window that pop-up, click "Browse my computer for driver
      software".

   f. On the next window, click "Browse..." button, then on pop-up window, find
      the following folder:
      ...\USB VCOM_driver\Win7\USBCDC\
      then click "OK" button to exit, then click "Next" button.

   g. Windows will start to install driver for Keil MCB2300 VCOM. When you see
      "Windows Security" window pop-up, click "Install" button to keep going.
 
   h. The "Update Driver Software" window will pop-up and Completing the
      Update Driver message is coming up. Click "Finish" button to exit. You
      will see "Other Devices" group disappear, and "MCB2300 USB VCom Port
      (COM-)" ("-" is Com Port number) is added into "Ports (COM & LPT)" group.

   (On Windows XP family - automatically)

   a. The "Found New Hardware Wizard" window pop-up, click "No, not this time"
      option, then Click "Next >" button.

   b. On the next window pop-up, click "Install from a list or specific
      location (Advanced)" option, then click "Next >" button.

   c. On next window, make sure "Search for the best driver in these
      locations." is selected, as well as "Include this location in the search:"
      is ticked, then click "Browse..." button, then on pop-up window, find the
      following folder:
      ...\USB VCOM_driver\XP\mcb2300-vcom_32Bit\
      then click "OK" button to exit, then click "Next >" button.

   d. Windows will start to install driver for Keil MCB2300 VCOM. When you see
      "Hardware Installation" window pop-up, click on "Continue Anyway" button
      to keep going.

   e. The "Found New Hardware Wizard" window will pop-up and Completing the
      Hardware Update Wizard message is coming up. Click "Finish" button to
      exit. You will see "Other Devices" group disappear, and "SAM4S USB VCom
      Port (COM-)" ("-" is Com Port number) is added into "Ports (COM & LPT)"
      group.

   (On Windows XP family - manually)

   a. To Open Device Manager of Windows XP, click on "Start" button on Taskbar
      -> Control Panel -> System -> "System Properties" window pop-up. Click on
      "Hardware" tab, then click on "Device Manager" button. The "Device
      Manager" window pop-up.

   b. On "Device Manager" window's category list, you should find
      "Other Devices" with "Keil MCB2300 VCOM" listed under it. right click on
      "Keil MCB2300 VCOM" then select "Update Driver Software..."

   c. The "Hardware Update Wizard" window pop-up, click "No, not this time"
      option, then Click "Next >" button.

   d. On the next window pop-up, click "Install from a list or specific
      location (Advanced)" option, then click "Next >" button.

   e. On next window, make sure "Search for the best driver in these
      locations." is selected, as well as "Include this location in the search:"
      is ticked, then click "Browse..." button, then on pop-up window, find the
      following folder:
      ...\USB VCOM_driver\XP\mcb2300-vcom_32Bit\
      then click "OK" button to exit, then click "Next >" button.

   f. Windows will start to install driver for Keil MCB2300 VCOM. When you see
      "Hardware Installation" window pop-up, click on "Continue Anyway" button
      to keep going.

   g. The "Hardware Update Wizard" window will pop-up and Completing the
      Hardware Update Wizard message is coming up. Click "Finish" button to
      exit. You will see "Other Devices" group disappear, and "SAM4S USB VCom
      Port (COM-)" ("-" is Com Port number) is added into "Ports (COM & LPT)"
      group.

2. The driver for SAM4S USB VCOM is now complete.